Ironman iControl 400 Is A New Entry That Beats The Veterans

Ironman came on the market with a new, fresh line called „iControl”. What this new line has in addition to all the other inversion tables Ironman has launched is the angle locking system that promises a more comfortable experience. This innovative angle locking system is very reliable and it can be also found on „Atis series” or on the model LXT850 and so far the feedback received from the clients is very good. Ironman iControl 400 will work on your back pains helping your entire body to stretch and remove the pressure that causes spine pains and joints ache. In addition, with this new braking system, you can also work your core muscles and perform crunches, inverted sit-ups or squats but have at the same time your spine protected.

Ironman iControl 400 Inversion Table Review

How Safe is iControl 400?

All iControl series was made based on the principle on which LX300 inversion table was created and iControl 400 is no exception. This means that the arms are not foldable and the two U-shaped frames are limited in the opening. In iControl 400’s case, the producers installed a “hinge” which is limited by the frame but is secured with a ring pin. This is a solution designed by the producers to prevent you trap your fingers when you want to fold the table in order to store it. The structure of the inversion table is 1.5 thick steel making the whole structure extremely reliable and solid enough to support up to 300 pounds. A distinctive feature of the iControl 400 is the “Open Space” design. In this case, the bottom bar from the far is designed like a “stretching bar” with the front one left out. The entire frame is powder coated thus ensuring durability and resistance in time even if you use it, or fold and unfold it very often. In addition, in order to prevent skidding on the floor, it has four plastic cups covering the sharp ends.

What Is The Degree of Comfortability?

The backrest is extremely comfortable as it is foam padded with an upholstery covering it. This makes the backrest be double in thickness than any other inversion table on the market and it ensures a great comfort while inverting. Therefore, it will not be necessary to search for extra cushioning for your lower back because iControl 400 has it all. The footrest adjustability is limited, therefore it could be possible that your body will slip down if you are in a full upside down inversion position. Also, in such position, it might be possible that taller persons to get their heads out the backrest. What is more, iControl 400 has an innovate angle locking system where the gear lock was replaced by a braking pad. Like this, you will have full control over your inversion angle. When buying the iControl 400 you will notice that it also has a handy side holder which can be easily used to put your small personal things in there.

How Safe Is The Ankle Locking System?

The heels are supported by four identical cuffs which ensure your comfort as they are padded with a tough, resistant rubber. Some users may find it a bit too hard for their ankles, but the degree of comfortability depends mainly on everyone’s anatomy, the angle of inversion and sensitivity level. The front part of the heel holder was designed to lock your ankles as tight as possible being spring loaded. One inconvenient would be the fact that you will need to bend over and check the pin before you start but also to release your ankles when you have finished your inversion session. But you have to appreciate that the pin is longer that in other inversion tables, therefore you will not bend over totally in order to lock or unlock your ankles. The ankle locking system footrest offers three options that help you to adjust the size of your feet. Once you have decided which one to pick, you will have to secure with two bolts and it will not be possible to change this setting while you are inverting.

How Easy Is It to Adjust and Balance?

When you are using iControl 400 for inverting, you have full control over your inversion angle as this model does not come with any tether strap to help you. You will have as an alternative the braking handle which helps you prevent any aggressive inversion or accidents. In addition, you will be able to adjust the height according to your body anatomy by using the height adjusting bar. This bar has a spring-loaded pull-pin and on its bottom, you will find a plastic knob. Therefore, if you want to make adjustments, you will need to use both of your hands as otherwise it will not be possible. The iControl 400 was designed to serve both as an inversion table and an ab trainer, therefore the table will lock itself in full inversion.

How Easy Is It to Get It Ready For Use?

Producers thought that you are a busy person that is facing horrible back pains and that you will not have the patience and time to assemble iControl 400 inversion table. Therefore, it comes semi-assembled. All you have to do after you get is to take it out from the box and put together the stand with the handles and some minor parts. You will find in your package also the tools to do it, so you will not need a whole kit with tools to be able to assemble it. The instructions how the table disassembled even though some parts are already semi-assembled, therefore do not get confused by this aspect. It is not such a headache to put it together and you will need no more than 90 minutes to finish it.

How Easy Is to Fold and Store It?

When is folded, the iControl 400 will not stand upright, therefore you will have to lean the whole assembly on a wall? When the legs are folded this inversion table turns in a rather big (88 inches height) and pretty heavy structure of 66 pounds. Therefore, you will need an appropriate space for these dimensions to store it. If you intend to put it under the bed, then you will need a bed has minimum 18 inches clearance. Also, when you have decided to fold it, pay attention to put the safety ring pin into the frame holes as you will need it for your next inversion session as well.

Dimensions and Capacity

First and foremost, the iControl 400 inversion table is not a light piece of equipment. It weighs 66 pounds and once you have assembled it, its dimensions are the following: 57 inches of height, 49 inches in length, and 32 inches in width. The maximum capacity it supports is actually 275 pounds according to what is written in the User Manual and the height is adjustable from 4.10 inches to 6.6 inches.

How Affordable Is It?

The Ironman iControl 400 stays in the price range of $200-$300 being the type of inversion that is both affordable but stable and comfortable, offering a superior inversion experience.

Warranty Period Provided

The manufacturers offer a 5-year warranty period for the whole assembly.

PROS and CONS

PROS

• Innovative angle braking
• Longer ankle locking pin
• Comfortable backrest
• Solid construction
• “open space” design
• Supports up to 275 pounds
• Adjustable height up to 6.6 inches
• Most of the parts come semi-assembled

CONS

• The backrest is a little short for taller people
• You have to bend over despite the long pin lever
• Slightly uncomfortable ankle locking system
• Bulky assembly when it is folded

What Do Costumers Think About iControl 400?

Ironman iControl 400 is a relatively new model, therefore customers’ still evaluate it and form their opinion. Those who have already it are pleased by its stability and comfort provided. They mention that they could assemble the inversion table very easily and that it does its job perfectly. On the other hand, approximately 10% of the persons who bought it, still find the ankle locking system quite uncomfortable. In addition, when they fold the inversion table, they find the whole assembly rather bulky and difficult to store.

Conclusion

Despite the fact that the iControl 400 is still a new entry on the inversion tables market, it already managed to gain enough popularity and trust from its customers. The improvement it brings with the new braking system is huge and the risk of accidents is diminished almost to zero. On top of that, it is a sturdy construction, with a higher degree of comfort at a price that beats its competition. Therefore, if you are looking for an inversion table that is more close to costing $200, offering at the same time the advantages of a premium  table, then iControl 400 is the combination that you need.